image of ecommerce

SHOP by Department

Wood Care - Paint Treatments - Rust Protection

or go direct to product below

Stain Treatments Page

or go direct to product below

Wood Care etc. Page

or go direct to product below

Wood Restoration, Cleaning and Preservation

Unlike bleach or chlorine based cleaners it will not damage the wood fibres. Instead it naturally cleans the wood to remove the grey weather beaten look caused by exposure to the sun and rain.

Being natural Net-Trol is safe to use, requiring no specialist equipment or protective clothing and will not harm surrounding plants or shrubs.

A concentrated formula, Net-Trol offers exceptioonal value for money, as it may be used neat or diluted in ratios up to 1:4 with clean fresh water.

Net-Trol is ideal for decking, exterior furniture (including plastic), stone, concrete and GRP. Net-Trol will even remove rust stains.

Net-Trol is ideal for restoring the colour to faded & weathered garden furniture. Suitable to teak and other hardwoods, it restores the rich natural colour and prepares the wood for a penetrating wood finish.

Available in clear tone, Textrol Penetrating oil finish is a high solids premium oil finish for exterior wood. It has been developed specifically to penetrate deep into the wood to provide a long-lasting protection against moisture damage, offer superior UV resistance, while at the same time enhancing the woods natural beauty. 

Textrol provides a mildew resistant finish which , because it is non-film building, will not crack peel or flake. When Textrol is first applied the wood will darken to a rich matt colour. It will then gradually lighten depending on the intensity of sun exposure.

Textrol may be used on soft or hardwoods, pressure treated timber, cedar and redwood. It is ideal for garden decks, fences and cladding, shake and shingle roofs, log homes and garden furniture.

Prepdeck stripper/cleaner, is a powerful, professional strength, high grade product specially designed for removing old solid and semi-transparent stains, water sealants, grade stamps, mill glaze and other surface contaminants from wood.

If this stripper/cleaner was simply one of the best ways to remove stains and finishes it would be a good enough reason to buy it. But it does so much more. Diluted it makes a powerful cleaner for removing dirt and other surface contaminants. It's a fast, easy way to remove mill glaze so that new wood will accept a penetrating finish. It's also a great way of removing grade stamps.

It really is 4 products in one, making it not only easy but also very economical to use.

Paint additives Plus Rust Treatments

Water-Based ESP (Easy Surface Prep) is a special blend that preparesd and primes the surface in one. It gets high gloss surfaces ready for painting quickly and easily - negating the need for the dusty and dirty job of sanding.

ESP provides a 'micro priming' bonding film that paint really stick to. Just 2 hours after applying ESP you can be painting over it with any water or oil based paint, assured in the knowledge it won't peel.

Easy on the hands and odourless, Owatrol ESP is the easy, quick and effective way to prepare any non-porous surface whether inside or out and being odourless makes it ideal in confined areas. Just clean the surface, apply ESP, wait 2 hours then paint.

Can be applied direct to ceramic and glass surfaces as well as baked enamels, laquers, plastics and many more surfaces.

Owatrol E-B Emulsa Bond is the painter and decorators perfect solution to saving time and money when painting chalky powdery or porous surfaces whether inside or out. It let's you apply the first coat of paint and stabilising primer in  the same application, thereby eliminating the need for applying a separate stabilising solution. 

UWhen added to the first coat of masonry paint or interior emulsion, E-B acts as a stabiliser, penetrating deep into the surface to firmly bond the first coat of paint to the substrate, ensuring an even coverage and maximising adhesion between the first and second coat of paint. 

E-B's high solids content maintains the inherent characteristics of the paint improves hiding  power and increases coverage by up to 20%

Low in odour, it is the ideal solution to all those interior distemper and whitewash problems, eliminating the need for the laborious job of washing down. Just scrape the surface to remove loose material and E-B mixed into the first coat will make the paint stick.

CIP (corrosive inhibiting primer) is a non-toxic, coloured, anti-corrosive primer that possess the penetrating properties of Owatrol Oil with the added benefit that it may be over-coated with virtually any kind of finish, from an ordinary paint to a 2 pack high solvent epoxy finish.

Simple and easy to use it may be applied by brush, roller or spray with minimal surface preparation. CIP stabilises the surface, penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layerthat other coatings can adhere to.

Suitable for interior or exterior use, it is ideal in difficult conditions such as tropical climates, corrosive gases, coastal areas and where high resistant finish is to be applied and necessary.

CIP maybe used on new or rusted surfaces and is especially recommended for the protection of cars, civil engineering equipment, nautical ballast tanks as well as every items such as metal railings and gates.

Unlike thinners, which weakens the paint, Owatrol fortifies it - increasing penetration and adhesion to provide a longer lasting finish that resists peeling and flaking.

Owatrol added to any oil-based paint, varnishes or stains, beats paint drag - reducing brush marks and increasing coverage.

Owatrol can be used to combat rust wherever it occurs, penetrating deeply to stabilise the rust and prevent it reforming. Because of it's wetting properties it penetrates through the rust to the sound metal, driving out any moisture and air; filling the rust pores with oil. It then bonds with the rust to form a flexible protective coating which may be painted over without further preparation.

Coverage when used neat: Wood 5-8m2 Rusted Surface 8-12m2 Drying Time: Wood - Overnight: Metal 24 Hours. Size 1 ltr Application: Brush, Roller, Spray

Leather Cleaning & Conditioning

PROCHEM LEATHER CLEANER is a mild leather upholstery cleaner and conditioner containing a blend of speciality surfactants and neatsfoot oil. Can also be used as a cleaner only, for after-cleaning treatment with PROCHEM LEATHER CONDITIONER.

This ready to use white emulsion leaves a light lemon fragrance after use.

Shake product well before use and pre-test on an inconspicuous area for colour-fastness and texture corruption. PROCHEM LEATHER CLEANER is recommended for use on smooth leather - inspect surface for cracks, cuts or damage. THIS PRODUCT IS NOT SUITABLE FOR USE ON SUEDE. Brush surface before application then use a clean damp cloth to apply a small amount of LEATHER CLEANER to the upholstery, taking care to avoid wooden trim. Clean creases, corners and stitching thoroughly. Wipe away soiling with a clean, damp towel, then towel dry.

PROCHEM LEATHER CONDITIONER is a ready to use finisher for leather upholstery, for use after cleaning with PROCHEM LEATHER CLEANER. It replaces the leather's natural oil and restores suppleness, helping to protect and nourish without leaving any greasy residue.

Shake product well before use and pre-test on an inconspicuous area for colour-fastness and texture corruption. PROCHEM LEATHER CONDITIONER is recommended for use on smooth leather - inspect surface for cracks, cuts or damage. THIS PRODUCT IS NOT SUITABLE FOR USE ON SUEDE. Clean upholstery with PROCHEM LEATHER CLEANER, before applying LEATHER CONDITIONER with a clean, damp towel. Spread evenly over surface, before using a clean, dry towel to remove access and buff to a smooth finish.